Japanese
Japanese

JUNO-All in One Fiber-coupled Specifications

405 - 532nm

　 JUNO
405FC-AIO		 JUNO
445FC-AIO		 JUNO
473FC-AIO		 JUNO
488FC-AIO		 JUNO
515FC-AIO		 JUNO
515FC-AIO		 JUNO
532FC-AIO
Wavelength 405 ± 5 nm 445 ± 5 nm 473 nm 488 ± 5 nm 515 ± 5 nm 515nm 532 nm
Fiber output 75 mW 75mW 40mW 40, 75 mW 40 mW 40mW 40mW
Longitudinal mode Multi Multi Single Multi Multi Single Multi
Line width < 1 nm < 1 nm < 0.01 pm < 1.5 nm < 1.5 nm < 0.01 pm < 0.5 nm
Spatial mode M2 < 1.1
Output stability
(Constant temperature)		 < +/-1.0 % (8 hours)
Output stability
(10-40℃)		 < +/-3.0 % (8 hours)
RMS noise
(10Hz～20MHz）		 < 0.5 % < 0.5 % < 0.5 % < 0.5 % < 0.5 % < 0.5 % < 0.5 %
Mode field diameter
(Standard)		 3.5 ± 0.7 μm 3.7 ± 0.7 μm 3.7 ± 0.7 μm 4.0 ± 0.7 μm 4.3 ± 0.7 μm 4.3 ± 0.7μm 4.4 ± 0.7 μm
Fiber NA 0.07 - 0.1 0.07 - 0.1 0.07 - 0.1 0.07 - 0.1 0.07 - 0.1 0.07 - 0.1 0.07 - 0.1
Polarization ratio > 100 : 1
Polarization direction 90+/-4 degrees
Beam ellipticity
(θV/θH)		 1 ± 0.1
Warm-up time < 5 min.
Fiber length 1 m +/-100 mm
Fiber end FC/APC or FC/AFC (Option)
Fiber coating φ3 ｍｍ PVC or SUS
Type DD DD DPSS DD DD DPSS DPSS
Input voltage +5 VDC
Power consumption < 10 W < 10 W < 35 W < 10 W < 10 W < 35 W < 35 W
Operating temperature 10 - 40℃ ( < 80%RH)
Storage temperature -20 to +60℃ ( < 80%RH, No condensation)
Maximum base temperature 50℃
Dimensions (LxWxH) 100x40x40 mm
Cable length 1 ｍ
Fiber minimum
bending radius		 60 ｍｍ
Interface functions Laser ON-OFF / Output adjustment / Output monitor / LD current monitor / Laser OK signal / LD alarm signal (Analog , RS232)

DPSS：Diode Pumped Solid State laser, 　　DD : Direct Diode laser

532 - 1064nm

　 JUNO
532FC-AIO		 JUNO
542FC-AIO		 JUNO
553FC-AIO		 JUNO
561FC-AIO		 JUNO
594FC-AIO		 JUNO
640FC-AIO		 JUNO
785FC-AIO
Wavelength 532 nm 542 nm 553 nm 561 nm 594 nm 640+1/-4 nm 785 ± 10 nm
Fiber output 150mW 40mW 75mW 100mW 75mW 75 mW 30
Longitudinal mode Single Single Single Single Multi Multi Multi
Line width < 0.01 pm < 0.01 pm < 0.01 pm < 0.01 pm < 1 nm < 0.5 nm < 0.0１ pm
Spatial mode M2 < 1.1
Output stability
(Constant temperature)		 < +/-1.0 % (8 hours)
Output stability
(10-40℃)		 < +/-3.0 % (8 hours)
RMS noise
(10Hz～20MHz）		 < 0.5 % < 0.5 % < 0.5 % < 0.5 % < 1 % < 0.5 % < 0.5 %
Mode field diameter
(Standard)		 4.4 ± 0.7 μm 4.5 ± 0.7 μm 4.6 ± 0.7 μm 4.7 ± 0.7 μm 5.0 ± 0.7 μm 5.5 ± 0.7 μm 5.0 ± 0.9 μm
Fiber NA 0.07 - 0.1 0.07 - 0.1 0.07 - 0.1 0.07 - 0.1 0.07 - 0.1 0.08 - 0.12 0.08 - 0.12
Polarization ratio > 100 : 1
Polarization direction 90+/-4 degrees
Beam ellipticity
(θV/θH)		 1 ± 0.1
Warm-up time < 5 min. < 5 min. < 5 min. < 5 min. < 10 min. < 5 min. < 5 min.
Fiber length 1 m +/-100 mm
Fiber end FC/APC or FC/AFC (Option)
Fiber coating φ3 ｍｍ PVC or SUS
Type DPSS DPSS DPSS DPSS DPSS DD DD
Input voltage +5 VDC
Power consumption < 35 W < 35 W < 35 W < 35 W < 35 W < 10 W < 10 W
Operating temperature 10 - 40℃ ( < 80%RH)
Storage temperature -20 to +60℃ ( < 80%RH, No condensation)
Maximum base temperature 50℃
Dimensions (LxWxH) 100x40x40 mm 100x40x40 mm 100x40x40 mm 100x40x40 mm 100x50x40 mm 100x40x40 mm 100x40x40 mm
Cable length 1 ｍ
Fiber minimum
bending radius		 60 ｍｍ
Interface functions Laser ON-OFF / Output adjustment / Output monitor / LD current monitor / Laser OK signal / LD alarm signal (Analog , RS232)

DPSS：Diode Pumped Solid State laser,　　DD : Direct Diode laser