Japanese
Japanese

JUNO-Compact Fiber-coupled Specifications

405 - 532nm

　 JUNO
405FC		 JUNO
445FC		 JUNO
473FC		 JUNO
488FC		 JUNO
515FC		 JUNO
515FC		 JUNO
532FC
Wavelength 405 ± 5 nm 445 ± 5 nm 473 nm 488 ± 5 nm 515 ± 5 nm 515nm 532 nm
Fiber output 75 mW 75mW 40mW 40, 75 mW 40 mW 40mW 40mW
Longitudinal mode Multi Multi Single Multi Multi Single Multi
Line width < 1 nm < 1 nm < 0.01 pm < 1.5 nm < 1.5 nm < 0.01 pm < 0.5 nm
Spatial mode M2 < 1.1
Output stability
(Constant temperature)		 < +/-1.0 % (8 hours)
Output stability
(10-40℃)		 < +/-3.0 % (8 hours)
RMS noise
(10Hz～20MHz）		 < 0.5 % < 0.5 % < 0.5 % < 0.5 % < 0.5 % < 0.5 % < 0.5 %
Mode field diameter
(Standard)		 3.5 ± 0.7 μm 3.7 ± 0.7 μm 3.7 ± 0.7 μm 4.0 ± 0.7 μm 4.3 ± 0.7 μm 4.3 ± 0.7μm 4.4 ± 0.7 μm
Fiber NA 0.07 ～ 0.1 0.07 ～ 0.1 0.07 ～ 0.1 0.07 ～ 0.1 0.07 ～ 0.1 0.07 ～ 0.1 0.07 ～ 0.1
Polarization ratio > 100 : 1
Polarization direction 90+/-4 degrees
Beam ellipticity
(θV/θH)		 1 ± 0.1
Warm-up time < 5 min. < 5 min. < 5 min. < 5 min. < 5 min. < 10 min. < 5 min.
Fiber length 1 m +/-100 mm
Fiber end FC/APC or FC/AFC (Option)
Fiber coating φ3 ｍｍ PVC or SUS
Type DD DD DPSS DD DD DPSS DPSS
Input voltage +5 VDC +5 VDC +5 VDC +5 VDC +5 VDC 　+12 VDC +5 VDC
Power consumption < 10 W < 10 W < 35 W < 10 W < 10 W < 30 W < 30 W
Operating temperature 10 - 40℃ ( < 80%RH)
Storage temperature -20 to +60℃
( < 80%RH, No condensation)
Maximum base temperature 50℃ 50℃ 45℃ 50℃ 50℃ 50℃ 50℃
Dimensions (LxWxH) A A B A A C B
Cable length 1 ｍ
Fiber minimum
bending radius		 60 ｍｍ
Interface functions Laser ON-OFF / Output adjustment / Output monitor / LD current monitor / Laser OK signal / LD alarm signal

DPSS：Diode Pumped Solid State laser,　　DD : Direct Diode laser

Dimension A ： Laser head : 95x28x36.5 mm, Controller : 70x70x22 mm

Dimension B ： Laser head : 95x28x36.5 mm, Controller : 138x99.4x33.5 mm

Dimension C ： Laser head : 115x50x43.5 mm, Controller : 170x100x40 mm

532 - 1064nm

　 JUNO
405FC		 JUNO
445FC		 JUNO
473FC		 JUNO
488FC		 JUNO
515FC		 JUNO
515FC		 JUNO
532FC
Wavelength 405 ± 5 nm 445 ± 5 nm 473 nm 488 ± 5 nm 515 ± 5 nm 515nm 532 nm
Fiber output 75 mW 75mW 40mW 40, 75 mW 40 mW 40mW 40mW
Longitudinal mode Multi Multi Single Multi Multi Single Multi
Line width < 1 nm < 1 nm < 0.01 pm < 1.5 nm < 1.5 nm < 0.01 pm < 0.5 nm
Spatial mode M2 < 1.1
Output stability
(Constant temperature)		 < +/-1.0 % (8 hours)
Output stability
(10-40℃)		 < +/-3.0 % (8 hours)
RMS noise
(10Hz～20MHz）		 < 0.5 % < 0.5 % < 0.5 % < 0.5 % < 0.5 % < 0.5 % < 0.5 %
Mode field diameter
(Standard)		 3.5 ± 0.7 μm 3.7 ± 0.7 μm 3.7 ± 0.7 μm 4.0 ± 0.7 μm 4.3 ± 0.7 μm 4.3 ± 0.7μm 4.4 ± 0.7 μm
Fiber NA 0.07 ～ 0.1 0.07 ～ 0.1 0.07 ～ 0.1 0.07 ～ 0.1 0.07 ～ 0.1 0.07 ～ 0.1 0.07 ～ 0.1
Polarization ratio > 100 : 1
Polarization direction 90+/-4 degrees
Beam ellipticity
(θV/θH)		 1 ± 0.1
Warm-up time < 5 min. < 5 min. < 5 min. < 5 min. < 5 min. < 10 min. < 5 min.
Fiber length 1 m +/-100 mm
Fiber end FC/APC or FC/AFC (Option)
Fiber coating φ3 ｍｍ PVC or SUS
Type DD DD DPSS DD DD DPSS DPSS
Input voltage +5 VDC +5 VDC +5 VDC +5 VDC +5 VDC 　+12 VDC +5 VDC
Power consumption < 10 W < 10 W < 35 W < 10 W < 10 W < 30 W < 30 W
Operating temperature 10 - 40℃ ( < 80%RH)
Storage temperature -20 to +60℃ ( < 80%RH, No condensation)
Maximum base temperature 50℃ 50℃ 45℃ 50℃ 50℃ 50℃ 50℃
Dimensions (LxWxH) A A B A A C B
Cable length 1 ｍ
Fiber minimum
bending radius		 60 ｍｍ
Interface functions Laser ON-OFF / Output adjustment / Output monitor / LD current monitor / Laser OK signal / LD alarm signal

DPSS：Diode Pumped Solid State laser,　　DD : Direct Diode laser

Dimension A ： Laser head : 95x28x36.5 mm, Controller : 70x70x22 mm

Dimension B ： Laser head : 95x28x36.5 mm, Controller : 138x99.4x33.5 mm

Dimension C ： Laser head : 115x50x43.5 mm, Controller : 170x100x40 mm