JUNO-All in One Free space Specifications

375 - 515nm

  JUNO
375-AIO
JUNO
405-AIO
JUNO
445-AIO
JUNO
473-AIO
JUNO
488-AIO
JUNO
515-AIO
JUNO
515-AIO
Wavelength 375 ± 5 nm 405 ± 5 nm 445 ± 5 nm 473 nm 488 ± 5 nm 515 ± 5 nm 515 nm
Output 16, 70 mW 50, 100 mW 40, 100 mW 10, 20, 50 mW 50, 100, 200 mW 80 mW 50 mW
Longitudinal mode Multi Multi Multi Single Multi Multi Single
Line width < 0.5 nm < 1 nm < 1 nm < 0.01 pm < 1.5 nm < 1.5 nm < 0.01 pm
Spatial mode M2 < 1.3 M2 < 1.3 M2 < 1.3 M2 < 1.1 M2 < 1.3 M2 < 1.3 M2 < 1.1
Beam diameter (1/e^2) 0.7 ± 0.07 mm
Beam divergence angle < 1.0 mrad < 1.1 mrad < 1.2 mrad < 1.1 mrad < 1.3 mrad < 1.4 mrad < 1.2 mrad
Beam ellipticity (θV/θH)  1 ±0.1  1 ±0.1  1 ±0.1  1 ±0.15  1 ±0.1  1 ±0.1  1 ±0.15
Beam pointing stability < 6 μrad/℃ < 6 μrad/℃ < 6 μrad/℃ < 6 μrad/℃ < 6 μrad/℃ < 6 μrad/℃ < 6 μrad/℃
RMS noise
(20 Hz - 20 MHz)
< 0.2 % < 0.2 % < 0.2 % < 0.3 % < 0.3 % < 0.3 % < 0.5 %
Output stability < ±2 %
Polarization ratio > 100 : 1 (Vertical)
Warm-up time < 5 min. < 5 min. < 5 min. < 5 min. < 5 min. < 5 min. < 5 min.
Optical axis height 19 mm
Type DD DD DD DPSS DD DD DPSS
Input voltage +5 VDC
Power consumption < 10 W < 10 W < 10 W < 35 W < 10 W < 10 W < 35 W
Operating temperature 10 - 40℃ ( < 80 %RH)
Maximum base temperature 50℃
Storage temperature -20 to +60℃ ( < 80 %RH, No condensation)
Dimensions (LxWxH) 100x40x40 mm
Cable length 1m
Beam position tolerance ±1 mm ±1 mm ±1 mm ±0.5 mm ±1 mm ±1 mm ±0.5 mm
Beam angle tolerance ±5 mrad ±5 mrad ±5 mrad ±5 mrad ±5 mrad ±5 mrad ±5 mrad
Interface functions Laser ON-OFF/Output adjustment/Output monitor/LD current monitor/Laser OK signal/LD alarm signal  (Analog , RS232)

DPSS:Diode Pumped Solid State laser,  DD : Direct Diode laser

532 - 635nm

  JUNO
532M-AIO
JUNO
532S-AIO
JUNO
542-AIO
JUNO
553-AIO
JUNO
561-AIO
JUNO
594-AIO
JUNO
635-AIO
Wavelength 532 nm 532 nm 542 nm 553 nm 561 nm 594 nm 635 + 7/- 2 nm
Output 20,50 mW 50, 100,
150, 200 mW
50 mW 50, 100 mW 20, 50, 75,
100,150 mW
50, 100 mW 35mW
Longitudinal mode Multi Single Single Single Single Multi Multi
Line width < 0.5 nm < 0.01 pm < 0.01 pm < 0.01 pm < 0.01 pm < 1 nm < 0.5 nm
Spatial mode M2 < 1.1 M2 < 1.1 M2 < 1.1 M2 < 1.1 M2 < 1.1 M2 < 1.2 M2 < 1.3
Beam diameter (1/e^2) 0.7 ± 0.07 mm
Beam divergence angle < 1.2 mrad < 1.2 mrad < 1.2 mrad < 1.2 mrad < 1.2 mrad < 1.5 mrad < 1.7 mrad
Beam ellipticity
(θV/θH)
 1 ±0.1  1 ±0.1  1 ±0.1  1 ±0.1  1 ±0.1  1 ±0.2  1 ±0.1
Beam pointing stability < 6 μrad/℃ < 6 μrad/℃ < 6 μrad/℃ < 6 μrad/℃ < 6 μrad/℃ < 6 μrad/℃ < 6 μrad/℃
RMS noise
(20 Hz - 20 MHz)
< 0.5 % < 0.3 % < 0.3 % < 0.3 % < 0.3 % < 1 % < 0.2 %
Output stability < ±2 %
Polarization ratio > 100 : 1 (Vertical)
Warm-up time < 5 min. < 5 min. < 5 min. < 5 min. < 5 min. < 10 min. < 5 min.
Optical axis height 19 mm
Type DPSS DPSS DPSS DPSS DPSS DPSS DD
Input voltage +5 VDC
Power consumption < 35 W < 35 W < 35 W < 35 W < 35 W < 35 W < 10 W
Operating temperature 10 - 40℃ ( < 80 %RH)
Maximum base temperature 50℃
Storage temperature -20 to +60℃ ( < 80 %RH, No condensation)
Dimensions (LxWxH) 100x40x40 mm 100x40x40 mm 100x40x40 mm 100x40x40 mm 100x40x40 mm 100x50x40 mm 100x40x40 mm
Cable length 1m
Beam position tolerance ±0.5 mm ±0.5 mm ±0.5 mm ±0.5 mm ±0.5 mm ±0.5 mm ±1 mm
Beam angle tolerance ±5 mrad ±5 mrad ±5 mrad ±5 mrad ±5 mrad ±5 mrad ±5 mrad
Interface functions Laser ON-OFF/Output adjustment/Output monitor/LD current monitor/Laser OK signal/LD alarm signal  (Analog , RS232)

DPSS:Diode Pumped Solid State laser,  DD : Direct Diode laser

640 - 1064nm

  JUNO
640-AIO
JUNO
642-AIO
JUNO
785-AIO
JUNO
785S-AIO
JUNO
1064-AIO
Wavelength 640 + 1/- 4 nm 642 + 3/- 7 nm 785 ± 10 nm 785 ± 1 nm 1064 nm
Output 100 mW 60, 100 mW 45 mW 100 mW 500 mW
Longitudinal mode Multi Multi Multi Single Single
Line width < 0.5 nm < 0.5 nm < 0.01 nm < 0.02 pm < 0.04 pm
Spatial mode M2 < 1.3 M2 < 1.3 M2 < 1.3 M2 < 1.3 M2 < 1.1
Beam diameter (1/e^2) 0.7 ± 0.07 mm 0.7 ± 0.07 mm 0.7 ± 0.07 mm φ1.9±0.3 mm 0.8 ± 0.1 mm
Beam divergence angle < 1.7 mrad < 1.7 mrad < 2.1 mrad < 2.1 mrad < 2.1 mrad
Beam ellipticity
(θV/θH)
 1 ±0.1  1 ±0.1  1 ±0.1  1 ±0.1  1 ±0.1
Beam pointing stability < 6 μrad/℃ < 6 μrad/℃ < 6 μrad/℃ < 6 μrad/℃ < 6 μrad/℃
RMS noise
(20 Hz - 20 MHz)
< 0.2 % < 0.2 % < 0.2 % < 0.2 % < 0.3 %
Output stability < ±2 %
Polarization ratio > 100 : 1 (Vertical)
Warm-up time < 5 min. < 5 min. < 5 min. < 5 min. < 5 min.
Optical axis height 19 mm
Type DD DD DD DD DPSS
Input voltage +5 VDC +5 VDC +5 VDC +5 VDC +5 VDC
Power consumption < 10 W < 10 W < 10 W < 10 W < 35 W
Operating temperature 10 - 40℃ ( < 80 %RH)
Maximum base temperature 50℃
Storage temperature -20 to +60℃ ( < 80 %RH, No condensation)
Dimensions (LxWxH) 100x40x40 mm
Cable length 1m
Beam position tolerance ±1 mm ±1 mm ±1 mm ±1 mm ±0.5 mm
Beam angle tolerance ±5 mrad ±5 mrad ±5 mrad ±5 mrad ±5 mrad
Interface functions Laser ON-OFF/Output adjustment/Output monitor/LD current monitor/Laser OK signal/LD alarm signal  (Analog , RS232)

DPSS:Diode Pumped Solid State laser,  DD : Direct Diode laser